PRO/E 4.0 M030我看不懂英文的破解內容~謝謝 - 趣味新聞網

發表日期 2009-04-20T21:06:33+08:00

     本帖最後由 mayday03225 於 2009-4-22 09:26 編輯

PTC Pro/ENGINEER Wildfire 4.0 M020
===================================
1> open license.dat then displace all string"00-00-00-00-00-00" with your PTC_HOST_ID(Your netcard physical address) then save.

2> Install your pro/E &Pro/M wildfire4.0 M020 with above modified lic file.Node Locked lic method. No lic server installaion needed.

2.Run patchs!

Put proe-patch.exe under directory :
<Installed location>proeWildfire 4.0i486_ntobj       then apply it.

Put prom-patch1.exe under directory :
<Installed location>proeWildfire 4.0mechi486_ntin      then apply it.

Put prom-patch2.exe under directory :
<Installed location>proeWildfire 4.0mechi486_ntptc      then apply it.

3.If you want install PTC Distributed Services,access PTC.Setup: other product->PTC Distributed Services, use the modified license.dat at step one with node locked lic method. then


Put prods-patch.exe under directory :
<Installed location>ptc_distributed_services     then apply it.
---------------------------------------
P.S. Regarding embedded Vericut:

Actually, CGtech no longer supports its VERICUT as an embedded software for pro/e and no longer uses PTC lic.FYI, See the CGtech official website said: http://www.cgtech.com/ptc_update/index.htm hence don't offer patch for it.

That's all.Enjoy it!

Team ZWT 2008

分享鏈接